50 inches converts to 4 ft 2 in — 4.1667 feet in decimal form. The division leaves a remainder, which is why the answer reads more naturally as 4 ft 2 in than as a decimal. In metric it is 127 cm.
- Feet and inches4 ft 2 in
- Nearest 1/16 in50 in
- Centimetres127 cm
How 50 inches becomes 4 feet 2 inches
feet = inches ÷ 12 → 50 ÷ 12 = 4.1667
- Start with 50 inches.
- Divide by 12: 50 ÷ 12 = 4.1667.
- Keep the whole number — 4 feet — and multiply what is left by 12: 0.1667 × 12 = 2 inches.
- Written out: 50 inches = 4.1667 feet = 4 ft 2 in.
50 Inches in Feet in other units
| 4.1667 ft | Feet |
| 4 ft 2 in | Feet and inches |
| 127 cm | Centimetres — exact |
| 1.27 m | Metres — exact |
| 1270 mm | Millimetres — exact |
| 1.3889 yd | Yards |
| 50 in | Nearest sixteenth |
Where this measurement turns up
Screen sizes are diagonals
A 50-inch television is 50 inches corner to corner, not across. On a 16:9 panel that is about 43.6 in (3 ft 7.58 in) wide and 24.5 in tall, before the bezel and stand.
As a height
4 ft 2 in is 127 cm. Indian passports, medical forms and recruitment paperwork record height in centimetres while conversation uses feet, which is why this range is converted so often.
On site
Drawings write this as 4'-2", with the hyphen separating feet from inches and the trailing figure kept so the dimension cannot be misread as incomplete. Site teams work in feet even when the drawing is dimensioned in inches.
Values close to this one
| Inches | Feet | Feet & inches |
|---|---|---|
| 44 | 3.6667 | 3 ft 8 in |
| 45 | 3.75 | 3 ft 9 in |
| 46 | 3.8333 | 3 ft 10 in |
| 47 | 3.9167 | 3 ft 11 in |
| 48 | 4 | 4 ft 0 in |
| 49 | 4.0833 | 4 ft 1 in |
| 50 | 4.1667 | 4 ft 2 in |
| 51 | 4.25 | 4 ft 3 in |
| 52 | 4.3333 | 4 ft 4 in |
| 53 | 4.4167 | 4 ft 5 in |
| 54 | 4.5 | 4 ft 6 in |
| 55 | 4.5833 | 4 ft 7 in |
| 56 | 4.6667 | 4 ft 8 in |
Things to watch
Decimal feet is not feet-and-inches
4.5 feet means 4 ft 6 in, not 4 feet 4 inches. Half a foot is six inches, not five. This single confusion causes most cutting and ordering errors.
Divide rather than multiplying by 0.0833
The decimal factor is rounded, so it drifts: 50 × 0.0833 gives 4.165, where 50 ÷ 12 lands on 4.1667. Dividing is both simpler and exact.
Twelve to the foot, not ten
Decimal habits do not carry over. There is no such measurement as 4 feet 14 inches — that is 5 ft 2 in.
A screen size is not a width
Television and monitor sizes describe the diagonal. Compare your furniture against the panel width, never against the advertised number.
Frequently asked questions
Is 50 inches exactly 4.17 feet?
Not quite. 50 inches is 4.1667 feet, which reads more usefully as 4 ft 2 in. Only multiples of 12 convert to whole feet.
How tall is 50 inches in feet and inches?
4 ft 2 in, which is 127 cm.
What is 50 inches in centimetres and metres?
127 cm, or 1.27 m. Both figures are exact values rather than approximations.
Is a 50-inch TV 4 feet 2 inches wide?
No. Screen sizes are measured corner to corner. A 50-inch 16:9 panel is roughly 43.6 in (3 ft 7.58 in) wide, plus bezel and stand.
How is 50 inches written on a construction drawing?
As 4'-2". Feet come before the hyphen and inches after, and the trailing figure is kept rather than dropped so the dimension cannot be misread.
Is there always 12 inches in a foot?
Yes. Since 1959 the international inch has been defined as exactly 2.54 cm and the foot as exactly 0.3048 m, so 12 inches to the foot holds in India, the UK, the US and everywhere else, in every trade.
Nearby values
Related conversions
In short
50 inches is 4.1667 feet, which reads as 4 ft 2 in. Divide by 12 for the decimal, then multiply the remainder by 12 to get the inches back. Reporting the answer as feet and inches is almost always clearer than the decimal on site.